CannonKeys reopens Mass80 extras sale seven months after group buy
CannonKeys opened a fixed-window extras sale for the Mass80 touchscreen keyboard on October 8, 2026 — leftover units from a group buy that closed seven months earlier, not a new run.
CannonKeys' live product page for the Mass80 now lists an "Extras October 8th 3PM ET" sale window. That's the entire announcement, and it's worth reading at exactly that scale. This isn't a new board, a new colorway, or a second group buy — it's CannonKeys clearing leftover units from a Mass80 run that locked its order book back in February.
What actually happened
The Mass80 group buy ran at CannonKeys from 2026-02-03 through 2026-02-24, a three-week ordering window typical for the vendor's custom-board buys. Seven months later, the product page updated to advertise a fixed-time extras sale: October 8, 3PM ET, first-come-first-served.
The gap between those two dates isn't unusual once the fulfillment math is laid out. CannonKeys' own addons listing for the board — a separate SKU covering spare M-panels, plates, and wrist rests — carries an estimated delivery window of September to October 2026, with the standard group-buy disclaimer that "the estimated date of delivery is just that, an estimate." Read against that timeline, an extras sale landing in early October tracks almost exactly with when the main production run was expected to finish shipping to backers. Extras typically don't go up for sale until the vendor knows what's left over, and a vendor doesn't know what's left over until the batch has actually been built and allocated.
Why "extras" isn't a relaunch
That framing is worth stating plainly because "restock" headlines invite the opposite read. A buyer who skimmed past the February group buy might see "Mass80 back" in October and assume a second ordering round is open, with time to decide and configure. It isn't. CannonKeys has not published a new colorway, a revised PCB, or a changed price tier alongside the extras window, and nothing in the product page framing suggests one is coming. The Mass80 extras sale is closer in spirit to a warehouse clearing a shelf than to a brand launching a product.
The board underneath the headline
The Mass80 itself is a touchscreen-equipped 80%-class board designed by MWKEYS, marketed in some regions under the Milkyway name, and built around an integrated color touchscreen panel set into the case rather than a status LED or a small OLED readout — a feature set that put the board on keyboard crowdfunding trackers well before CannonKeys picked it up for a North American run. MWKEYS' own crowdfunding record for the design predates the February CannonKeys buy, and a parallel regional group buy ran in Japan through a separate distributor around the same close date, which is a reasonable sign the February window was one leg of a multi-market rollout rather than a CannonKeys-exclusive design.
CannonKeys runs the board as a CNC-aluminum, gasket-mounted, hot-swap kit on QMK firmware, consistent with how the vendor positions most of its custom-board catalog. The company has not published unit counts for either the original run or the October extras batch, and thock did not find a published price specifically for the restocked boards at the time the extras window opened — the only confirmed pricing on CannonKeys' site tied to the Mass80 line is the separate $175 addons kit, which carries an unavailable listing and a limited-stock tag. Readers chasing an exact restock price should treat the vendor's own checkout page as the only reliable source once the window opens; thock is not reproducing a number it can't confirm.
Routine vendor housekeeping, not a comeback
Extras sales of this shape are a normal late-stage step in how CannonKeys runs group buys generally, not a special accommodation invented for the Mass80. CannonKeys' own site-refresh notes describe the vendor's order-status tracker ending, after delivery, in a stage reading "Complete — units have been delivered to participants and we are awaiting extras information", which frames extras as a scheduled last step of the group-buy lifecycle rather than a reactive restock triggered by demand. Buyers who've followed other CannonKeys buys through to fulfillment will recognize the pattern: close the order book, build to the locked count plus whatever production overage the factory run produces, ship to backers, then clear the remainder in an announced, timed sale once the dust settles. The Blaine V2: SE and the Nyawice both closed their own order books through the same CannonKeys pipeline, and Mode's Sonnet R2 ran its second round there too — the multi-month gap between a CannonKeys close and whatever happens next is the vendor's house rhythm, not a Mass80-specific delay.
What to watch
The open question isn't whether the Mass80 is worth owning — the board's touchscreen pitch has already found its audience across two regional group buys. It's how fast the October 8 extras batch clears. A sale that sells out in the opening minutes says the February run undershot real demand, and vendors tend to remember that kind of signal when a designer brings them a second board. A batch that lingers past the opening hour says the opposite — that the February order book already captured most of the interest this design was going to generate. Either outcome is a small, useful data point on how touchscreen-equipped custom boards are actually selling in late 2026, independent of how loudly any single launch gets covered. Not every vendor is at the shelf-clearing stage CannonKeys has reached with the Mass80 — Wuque Studio's summer update shows a board still stuck in pre-buy speculation months after its first teaser, the opposite end of the same fulfillment timeline.
Keep reading
- News
Wuque Studio's summer update, and the Ikki68 Aurora holdover
A July 26 product-update post from Wuque Studio sent buyers back to the Ikki68 Aurora's listing page. Mammoth V2 and Promise V2 remain forum speculation, and no group buy has opened.
thock7 min read - News
The Blaine V2: SE puts three mount systems in one kit and asks the buyer to pick
CannonKeys's F12 TKL follow-up ships with top mount, single-sided gasket, and o-ring hardware in the same box, plus a carbon-fiber bottom plate and a POM underside element it calls Volcano. The mount menu is the story.
thock7 min read - News
Mode Sonnet R2 opened at CannonKeys
Mode's second round of its 75% Sonnet board ran at CannonKeys from 2026-06-01 through 2026-07-15 after a vendor-side timeline shift. See the in-article update for the dates and accent-weight color options; the closed entry is archived at /group-buys/past.
thock5 min read - News
The Nyawice puts a leaf-spring F1 mount under a friction-fit-cat-ears Alice
An Alice-layout board with a leaf-spring F1 mount, a 9-degree typing angle, and four colorways of friction-fit silicone cat ears ran at CannonKeys through 2026-05-17. The mount type is the editorial story; the cat ears are the conversation.
thock6 min read